You are here: Skip Navigation LinksHome » Products » Guitar Effects Processors » VIRTUAL AMPLIFICATION V-AMP PRO


Professional Guitar Amp Modeling and Multi-Effects Processor with 24-Bit/96 kHz Digital Output and ULTRA-G Cabinet Simulation

  • 32 authentic simulations of most popular guitar amplifiers freely combinable with 15 awesome speaker cabinet simulations
  • Stereo multi-effects including chorus, flanging, phasing, rotary, auto-wah, echo, delay, compressor and various effects combinations
  • 125 memory locations including 50 original artist presets
  • Intuitive user interface with direct display of all essential settings
  • Additional effect parameters directly accessible on the unit; Tap-tempo function allows real-time adjustment of effects speed parameter
  • Dedicated reverb control adds 1 of 9 available stereo reverb types to any amp, speaker or effects setting

  • Additional authentic cabinet simulation designed by Juergen Rath
  • Presence control adjusts a High-frequency filter, simulating the negative feedback of tube amps
  • Adjustable auto-chromatic tuner
  • 15 rear panel connectors allow comprehensive routing and suit virtually every conceivable application
  • Pre DSP send/return for dry recording and wet monitoring
  • Stereo ¼” Line outputs controlled by master volume for live use as guitar preamp
  • Balanced stereo XLR DI out with ground lift and switchable ULTRA-G cabinet simulation
  • Post DSP stereo inserts for connection of external effects
  • BNC wordclock input for external sample rate synchronization up to 96 kHz
  • AES/EBU and S/PDIF connectors allow usage as an all-purpose A/D converter with 24-bit/96 kHz digital output
  • MIDI implementation includes program changes, control changes and SysEx, allowing complete MIDI automation through our free Windows editor software downloadable at
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
If a lack of money and floor space is all that's been standing between you and a collection of vintage guitar amps and effects pedals, get ready to love the rack-mountable V-AMP PRO. It comes loaded with 32 amp models, 15 speaker cabinet models and 16 classic effects.

Any Classic You Like

The V-AMP PRO's 32 amp models are organized into four groups: CLEAN, BLUES, METAL and ROCK. Just twist the dedicated dial to plug into unbelievably authentic simulations of the greatest British and American tube amps from the 1950s to today. You even get models of uncommon—yet renowned—boutique tube amps! When you select an amp model, a speaker cabinet model is automatically selected. But if you'd prefer a different model, just go to EDIT>CABINETS, then use the BANK UP/DOWN buttons to navigate through all 15 options.

Just like on an actual guitar amp, you've got a three-band EQ, GAIN, REVERB, VOLUME and MASTER VOLUME dials. By holding the TAP button, the TREBLE dial becomes a PRESENCE control. This enables the adjustment of a high-frequency filter that can add or remove a "shimmer" from the V-AMP PRO's tone.

Top Tone—In Full Effect

The V-AMP PRO gives you flanger, chorus, compression, delay and 12 other beautiful digital effects to apply to your sound. Adjust the effect's level in the mix via the EFFECTS dial. To adjust effect parameters, you can rhythmically press the TAP button to alter delay times or LFO speeds, or hold down the TAP button and twist the EFFECTS knob to access e.g. feedback or depth. By using a MIDI pedal, such as the BEHRINGER FCB1010, you can access an additional Wah Wah effect. You can adjust the filter characteristic by entering EDIT mode, selecting the DRIVE menu and turning the EFFECTS knob while holding the TAP button.

Presenting the Presets

All of these elements have been combined into 125 different presets divided into 25 banks, accessible through the BANK UP/ BANK DOWN buttons. Within each bank, you can press buttons A through E to explore its different presets. You can also create and save your own presets. Start by selecting a preset, then making any changes you wish: amp, EQ, effect, etc. The preset LED will begin to flash, indicating that the V-AMP PRO is ready to save your settings. To do this, hold the preset button down for about two seconds. Once the LED stops flashing, you have saved the modified preset. On top of all this, the V-AMP PRO also features a built-in tuner and noise gate. In essence, it's a Swiss Army Knife for the home recording enthusiast or gigging guitarist who can't seem to settle on one amp.

Stunning in the Studio

The V-AMP PRO features several configurations that make it an invaluable asset in the studio. Access the configuration menu by pressing the B and D buttons at the same time. Then use BANK UP and BANK DOWN to select a configuration.

When using headphones, the V-AMP PRO will switch into Studio Mode 1 (S1). This stereo mode works well for both monitoring and recording with effects, amp and speaker modeling. It doesn't apply the additional three-band EQ to the signal, but most recording programs—like energyXT2.5— have their own EQ. In Studio Mode 2 (S2), the V-AMP PRO sends a signal with amp and speaker simulation, but only the right output has effects. You can either record both left and right outputs to separate tracks, or record the "dry" left output while monitoring the right output.

The V-AMP PRO features myriad routing options. It has a balanced XLR DI out with ground lift and switchable ULTRA-G cabinet simulation, post-DSP stereo inserts for connection o external effects, BNC wordclock input for externals sample rate synchronization up to 96 kHz. There are also AES/EBU and S/PDIF connectors so you can use the V-AMP PRO as an all-purpose audio-to-digital converter with 24-bit/96 kHz digital output.

Stellar on Stage

The V-AMP PRO has three live configurations. When performing live with this device, you can either run it to an amp on stage, run directly to the mixing board, or both. Live Mode 1 is the best choice for running the outputs directly to the mixer, because it applies amp and speaker simulation, effects and an additional 3-band EQ.

Use Live Mode 2 to run the V-AMP PRO into the effects return inputs of 2 different guitar amps. This configuration does not feature speaker simulation, allowing the amplifier's natural speaker sound to go unaltered. In this scenario, the amps would be mic'd on stage to get the sound to the house speakers, and having a dedicated monitor would be less important. In Live Mode 3, you can send the left output to an amp's eff ects return for onstage volume, while the right output sends signal to the main mixer for inclusion in the main house mix. Also note that you can press the TAP key while turning the GAIN knob to adjust the input sensitivity to match the output of your guitar's pickups. If the CLIP LED lights, the input's sensitivity should be reduced.

Veni, MIDI, Vici

The V-AMP PRO comes fully equipped to fit right into a MIDI (Musical Instrument Digital Interface) setup. It can be controlled in real time from a computer, or via a MIDI foot controller during a live performance. Its MIDI connectors are international-standard 5-pin DIN connectors. You will need dedicated MIDI cables (not included).

The MIDI IN jack receives MIDI controller data. It can be adjusted in EDIT mode by pressing the A button and then using the arrow keys. MIDI OUT/THRU sends data to a computer. You can transmit both preset data and parameter changes. Some people even use the V-AMP as a remote control for parameters of their DAW or VST instruments, which is more handy than using the mouse alone. If set to MIDI THRU, the V-AMP 2 does not send its own MIDI information, but passes on the signal received at the MIDI IN connector.

So Much Sound, So Little Hassle

It's hard enough finding another virtual guitar amplifier with this much versatility, let alone one as economical as the V-AMP PRO. This rack-mountable wonder will leave you reeling in your own creativity, with cash to spare for other gear you'll need along the way to becoming a sonic titan both live and in your home studio.

Reviews from the Press

It's very easy to assume that when a product is priced at the lower end of the market that its quality will also follow suit, and why not, this is normally the case. However, Behringer has turned this philosophy on its ear by consistently developing gear that is of the highest quality at prices that leave you shaking your head in disbelief. [...]

August 2003 Read More

The same good range of clean and dirty amp sounds as their forebears, the same strong effects, and the same great user interface. Created for both live and recording applications, the V-AMP series combines guitar amp modeling, speaker modeling and effects, enabling a fully produced DI’d guitar sound to be achieved on stage or in the studio. V-AMP PRO’s sounds are strong, very playable, and even the clean and slightly dirty sounds are very plausible.

January 2004 Read More

V-AMP PRO wins coveted Total Guitar Best Buy Award...Words by Rob Tribe "As It Says On The Box, The V-AMP Goes Pro!"

November 2003 Read More


Spec Sheet, English

PDF, 704 KB

May 30, 2011*Agree and Download

Manual, Deutsch

PDF, 2.1 MB

July 14, 2011*Agree and Download

Manual, English


July 14, 2011*Agree and Download

Manual, Español

PDF, 2.1 MB

July 18, 2011*Agree and Download

Manual, Finnish


July 18, 2011*Agree and Download

Manual, Français


July 18, 2011*Agree and Download

Manual, Italiano


July 18, 2011*Agree and Download

Manual, Português

PDF, 2.1 MB

July 18, 2011*Agree and Download

Manual, Svenska


July 18, 2011*Agree and Download

Manual, Dansk

PDF, 1.9 MB

July 18, 2011*Agree and Download


Editor Software

V-AMP Editor Help 2.0- Design Help (421 KB)

*Agree and Download

Editor Software

V-AMP Editor 2.03 - Design (english) (1353 KB)

*Agree and Download


Warwick Streamer

Fat bass sound. My favorite i use for gigs

Amp Model: Black Twin

Created by: Hoogendoorn Eric

*Agree and Download


Picking in tempo the overlay has an almost bowing sound, but at a quick pace. Also simular to EVH's Cathederals sound a little.

Amp Model: AND Custom

Created by: James Carrol

*Agree and Download

Another Brick p1

Exact replication of Pink Floyd's "Another Brick in the wall Pt.1. Found all delay times off David Gilmour Website.

Amp Model: Clean V-AMP

Created by: Tyler Mcgraw

*Agree and Download

Run like hell

Again, pretty close to the real song. Delay times were found off of a artist website. I play along with it, and it works.

Amp Model: Clean V-AMP

Created by: Tyler Mcgraw

*Agree and Download

Camera Eye

Good soft chorus with a slight delay for a full sound, Great for the lead part also.

Amp Model: Modern Hi Gain

Created by: Sib Bri

*Agree and Download

*By clicking the "Agree & Download" button, you confirm that you have read and agree to the terms and conditions of the
MUSIC Group End User License Agreement

Related Products

You Are Covered

We always strive to provide the best possible Customer Experience. Our products are made in our own MUSIC Group factory using state-of-the-art automation, enhanced production workflows and quality assurance labs with the most sophisticated test equipment available in the world.

As a result, we have one of the lowest product failure rates in the industry, and we confidently back it up with a generous 3-Year Warranty program.

**Warranty details can be found at

All trademarks are the property of their respective owners. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

1 2 3 4