32-bit USB ASIO/MIDI driver:

• Adapted for BCD2000

• Running on Windows XP (32-bit)

• Restrictions on Windows Vista and Windows 7 (32-bit): Driver installation has to be repeated in ‘compatibility mode’ if an error message appears while first installation try

• No support for Windows 7 (64-bit)

• Fixes a problem concerning isochronous streams on Intel 82801FB/FBM host controller (used on many mainboards nowadays, e.g. DELL Optiplex GX280)

Combined 32/64-bit driver:

• Adapted for BCD3000

•  Running on Windows XP, Windows Vista, and Windows 7 (32-bit and 64-bit) 

32-bit USB ASIO/MIDI driver:

• Adapted for BCD3000 

• Running on Windows XP, Vista and Windows 7 (32-bit)

• No support for Windows 7 (64-bit)

Combined 32/64-bit 3rd party ASIO driver by ASIO4ALL:

• Alternative driver for all BEHRINGER USB audio hardware (including C-1U) – except BCD2000!

•  Running on Windows XP, Windows Vista, and Windows 7 (32-bit and 64-bit)

• Universal ASIO Driver for WDM Audio

• Restrictions for BCD3000: No MIDI I/O operation possible

32-bit USB MIDI Driver:

• Adapted for all BEHRINGER USB MIDI hardware in common – except BCD2000 and BCD3000!

• Running on Windows XP (32-bit), Windows Vista (32-bit), Windows 7 (32-bit)

• Supporting name indication of the connected BEHRINGER hardware inside the MIDI software

• Multi-client support

64-bit USB MIDI Driver:

• Adapted for all BEHRINGER USB MIDI hardware in common – except BCD2000 and BCD3000!

• Running on Windows 7 (64-bit)

• Supporting name indication of the connected BEHRINGER hardware inside the MIDI software

• Multi-client support
  

USB MIDI DRIVER (V1.2.1.3) for BCF2000 & BCR2000 (94 KB)

Bugfixes:

• BSOD removed when device was using USB-3 mode and Logic was started

• Audio was distorted in case of heavy midi traffic

Enhancements:

• in some early models of BCF2000 a switch from or to LC, BC or MC Mode causes the device to not work correctly if the user does not wait at least 7 seconds after switching off the device before switching it on again. A system message will now pop up saying : “The I/O device is configured incorrectly or the configuration parameters to the driver are incorrect.” In that case just click that box, switch off the BCF2000 wait for at least 7 seconds and switch it on again. 

• The DLL was removed.

For Cubase SX
By Steinberg
(Created by BEHRINGER)

For Cubase SX
By Steinberg 
(Created by BEHRINGER )

For Reason
By Propellerhead
(Created by BEHRINGER)

BCR2000 Version 1.10 (66 KB)

New in V1.10 !

Push functions, which are assigned with Program Change commands, can now be stepped up and down (increment/decrement). The size of the steps is also programmable so if your presets are arranged in banks of a fixed size (eg. 8 presets per bank), V1.10 allows you to step up and down through the banks as well as preset for preset.

This version also incorporates a pair of bug fixes regarding MIDI clock data and transmission of NRPNs in GS/XG mode.

BCR2000 Version 1.07 (842 KB)

• Optimally matched to B-CONTROL EDIT software

• Bug fixes

Firmware Update Utility (270 KB)

B-CONTROL EDIT Version 0.2 beta 3 (2820 KB)

32-bit USB MIDI Driver:

• Adapted for all BEHRINGER USB MIDI hardware in common – except BCD2000 and BCD3000!
• Running on Windows XP (32-bit), Windows Vista (32-bit), Windows 7 (32-bit)
• Supporting name indication of the connected BEHRINGER hardware inside the MIDI software
• Multi-client support

64-bit USB MIDI Driver:

• Adapted for all BEHRINGER USB MIDI hardware in common – except BCD2000 and BCD3000!
• Running on Windows 7 (64-bit)
• Supporting name indication of the connected BEHRINGER hardware inside the MIDI software
• Multi-client support

USB MIDI DRIVER (V1.2.1.3) for BCF2000 & BCR2000 (94 KB)

Bugfixes:

• BSOD removed when device was using USB-3 mode and Logic was started

• Audio was distorted in case of heavy midi traffic

Enhancements:

• in some early models of BCF2000 a switch from or to LC, BC or MC Mode causes the device to not work correctly if the user does not wait at least 7 seconds after switching off the device before switching it on again. A system message will now pop up saying : “The I/O device is configured incorrectly or the configuration parameters to the driver are incorrect.” In that case just click that box, switch off the BCF2000 wait for at least 7 seconds and switch it on again. 

• The DLL was removed.